اینورتر سینوسی TS-1000-224B

Mean Well TS-1000 True Sine wave Inverter:

Designed by high frequency topology, TS-1000 series are light weights and posse up to 92% of high efficiency. They can provide up-to 1000W continuously for all kinds of harsh load with low THD<3%. Peak load capability including 1150W for 3 minutes, 1500W for 10 seconds, or 2000W surge power for 30 utility cycles.

TS-1000 is a typical power inverter that switches dc input to ac output. It is digital controlled by microprocessor and their ac output voltage, frequency and standby saving mode can be adjusted easily through the front panel or optional monitoring software. Besides, these power inverters are equipped with complete protections, include BAT over voltage protection, BAT low alarm, BAT low shutdown, internal fuse, BAT reverse polarity, and dc circuit breaker for input side and short circuit, inverter overload, over temperature protections and ac circuit breaker for output side. The design of TS-1000 series comply with global safety and EMC certificates and are suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor. A wide range of input voltages ensure high flexibility of applications. High quality, reliability and durability characterize MEAN WELL products.

TS-1000-224B Features:

• Input voltage range: 21-30 VDC
• Input DC current: 50A typical
• Output power: 1000W continuous /1150W for 180 sec/ 1500W for 10 sec
• High surge power 2000W for 30 cycles, 2 times nominal power for motor related applications
• Output voltage 200 / 220 / 230 / 240VAC selectable by button switches
• Output voltage factory setting set at 230VAC
• 50±0.1Hz; 50/60Hz selectable by setting button switch
• True sine wave output waveform (THD<3%) at rated input voltage
• AC output voltage regulation: ±3%
• Very low no-load power consumption < 5W
• Front panel indicator for: Battery voltage level, output load level, saving mode, fault and operation status
• Over Temperature Protection: 75°C ±5°C by internal RTH3 detect on heatsink of power diode
• Conformal coated
• Over Load Protection: 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
• Output Short Protection: Shut down o/p voltage, re-power on to recover
• Working Temperature: 0 ~ +40°C @ 100% load ; +60°C @ 50% load
• Vibration: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
• Safety standards: IEC62368-1 CB, EAC TP TC 004 approved; Design refer to EN62368-1
• EMI Conduction & Radiation: Compliance to EN55032 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark
• EMS Immunity: Compliance to EN61000-4-2,3,8 ENV50204, EN55035
• Withstand Voltage: Bat I/P-AC O/P: 3.0KVAC AC O/P- FG: 1.5KVAC
• Isolation Resistance: Bat I/P-AC O/P, Bat I/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
• High efficiency 91%
• Built-in remote ON-OFF control
• Dimensions: 345 L x 184 W x 70 D (mm)
• Applications : Home appliance, power tools, office and portable equipment, vehicle and yacht …etc.
• 3 year warranty

Available models:

• 10.5-15V: TS-1000-212B
• 21-30V: TS-1000-224B
• 42-60V: TS-1000-248B

Specs:

TS-1000-SPEC

User’s Manual:

TS-1000-Manual

Catalogue:

TS-Catalogue

Inverter short-form:

TS-Shortform