LED درایور PLM-40-350

PLM-40 Series:

The 40W AC/DC economical LED power supply PLM-40 fulfill the cost-saving requirement of LED lighting market. Featuring 110~295VAC input range, these new units have 6 kinds of constant current outputs from 350 to 1750mA for selection. With single stage PFC circuit design, PLM-40 series is a cost effective power solution to reach high PF value (PF>0.9). They also comply with harmonic current limitation as per EN61000-3-2 Class C, and fulfill the general lighting requirements. The full series features no load power consumption of less than 0.5W and set up time less than 500ms, which comply with the ErP regulations required for lighting fixtures in the European Union.

PLM-40 series possess up to 88% of high efficiency, so that they can work between -30°C to +45°C using only free air convection, which fulfills the demands of high temperature working environments in closed lighting system. Enclosed within a UL 94V-0 rated plastic case and Class II AC input design (two wires, without FG), these units can effectively prevent users from electrical shock. Different from the general wire-style I/O connection, PLM-40 series are designed with screw-less push clamp terminal blocks, which allow users a more convenient wiring installation. Other standard functions include short circuit and over temperature protections. In addition, the full series complies with global certificates of ENEC EN61347-2-13, EN62384, UL8750, CB, and CE lighting related regulations, which can greatly guarantee operation safety. Suitable applications include all kinds of indoor LED lighting, office lighting, commercial lighting, and indoor LED decorative lighting.

The PLM series are LED drivers designed to work directly with LEDs (LED boards or COBs), not with LED strips. They are used in equipment that is powered by constant current. This Driver works in constant current mode when we connect the LEDs directly that have a voltage within the output voltage range in constant current mode and a working current equal to the output current. With plastic casing, PLM series has small and compact size with active PFC and high reliability at low cost.

PLM-40-700 Features:

• 110~295VAC universal AC input
• Constant current design (C.C. mode): 53 ~ 105 VDC @ 350 mA
• Built-in active PFC function
• No load power consumption < 0.5W
• Set up time 500 ms
• 87% high efficiency
• Plastic case with 94V-0 fire prevention level
• I/O push clamp terminal block
• Isolation class II, no FG
• Cooling by free air convection
• Working temperature: -30°C ~ +45°C
• Protections: Short circuit / Over temperature
• IP30 design
• Class II insulation (without earthing)
• Certificates: UL / CUL / ENEC / CB / CE
• Dimension (LxWxH): 175x 42x 24mm
• High reliability at reasonable cost
• 2 years warranty

Specs:

PLM-40-SPEC