LED درایور LPF-60

LPF-60 Series:

LPF-60 series – Taiwan Excellence Award winner- is a 60W AC/DC LED driver featuring the dual modes constant voltage and constant current output. LPF-60 operates from 90~305VAC and offers models with different rated voltage ranging between 12VDC to 54VDC. Thanks to the efficiency up to 90%,with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection.

The LPF series power supplies are characterized by a narrow plastic housing with a high tightness class, which allows them to be used in conditions of increased humidity. Wires with a length of 60 cm are led out of the housing. The power supplies provide a constant output voltage regardless of the load. The LPF-40D and LPF-60D models also have a dimming function that allows you to adjust the current efficiency using 1-10VDC voltage, pulse filling width (PWM), or an external resistor. They are designed to power a wide range of devices, including lighting and decorative LED systems, including individual LEDs, strips, modules, panels, halogen LED bulbs, etc.

This power source is designed to work directly with LEDs (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.

This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.

You can also work in voltage mode constant giving a fixed voltage of 30V if the load is powered at constant voltage and does not overcome the maximum output power.

With plastic housing, designed for applications of LED lighting or LED displays. Suitable for dry environments, humid, and wet conditions. Complies with the requirements of security at the global level to illumination.

LPF-60 Features:

• Universal AC input / Full range (90 ~ 305VAC, 127 ~ 431VDC)
• Constant Voltage + Constant Current mode output
• Built-in active PFC function
• High efficiency up to 90%
• High quality plastic housing in accordance with the IP67 standard
• Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• Fully isolated plastic case
• Fully encapsulated with IP67 level
• Class II power unit, no FG
• Class 2 power unit
• Suitable for LED lighting and moving sign applications
• Compliance to worldwide safety regulations for lighting
• Suitable for dry / damp / wet locations
• Typical lifetime > 50,000 hours
• 5 years warranty

LPF-60-30:

30 Volts @ 2 Amps
Constant Current Region:18 – 30 Volts

Specs:

 LPF-60-SPEC