منبع تغذیه ریلی HDR-60-12

HDR-60-12 (12V, 4.5A):

HDR-60-12 is one economical ultra slim 54W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 52.5mm (3SU) in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 85VAC to 264VAC (277VAC operational) and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.

HDR series is the latest generation of power supplies for din rail format ladder MEAN WELL.
These sources are class II non-grounded, designed for installation in electrical boxes housing for applications of building automation, industrial applications, security, telecommunications, and also for residential applications to be certified to EN61558-2-16.

HDR family have a low consumption at no load and high efficiency which make it suitable for all types of applications and allow a greater saving of energy.
They are designed to go perfectly in a box electric housing with its format, type ladder and width of 2SU (35mm) for nominal 60 W.

HDR-60 is designed with plastic housing that it can effectively prevent user from electric hazards. With working efficiency up to 88%, the entire series can operate at the ambient temperature between -30°C and 70°C under  air convection. The complete protection functions and relevant certificates for home automations and industrial control apparatus (IEC62368-1,UL508,UL62368-1,EN61558-2-16) make HDR-60 a very competitive power supply solution for household and industrial applications.

It’s Mean Well. That should just say it all. Quality product at a good price. Well made. Works great. Voltage adjustment range is great. Voltage is stable under load. Customers have no complaints at all. Works exactly as expected. Looks nice and has been tested for diversified projects and results are perfect.

HDR-60 Features:

• Ultra slim design with 52.5mm (3SU) width
• Universal input 85~264VAC (277VAC operational)
• No load power consumption < 0.3W
• Isolation class Ⅱ
• Pass LPS (Limited power source)
• Adjustable DC Output voltage
• Protections : Short circuit / Overload / Over voltage
• Cooling by free air convection (working temperature: -30~+70°C)
• DIN rail TS-35/7.5 or 15 mountable
• Over voltage category Ⅲ
• LED indicator for power on
• 3 years warranty

More Features:

• Overload: 105 ~ 160% rated output power, Protection type: Hiccup mode when output voltage <50%, recovers automatically after fault conditions is removed.
• Over Voltage Protection type: Shut down output voltage, re-power to recover

Applications:

• Household control systems
• Building Automation
• Industrial control systems
• Factory automation
• Electromechanics

Mounting Instruction:

Mount as shown in figure only, with input terminals down, or else sufficient cooling will not be possible.
Admissible DIN rail：TS35/7.5 or TS35/15

For rail fastening：
（a) Tilt the unit slightly rearwards.
（b) Fit the unit over top hat rail.
（c) Slide it downward until it hits the stop.
（d) Press against the bottom for locking.
（e) Shake the unit slightly to check the locking action.

Specs:

HDR-60-SPEC

Also from HDR Family: HDR-30